1. Home
  2. Anchoring

The detail that matters

Film is only as strong as its anchor.

Security film holds broken glass together. Anchoring is what holds the whole pane in its frame. Many installers apply the film and stop there, and that's where the protection ends. We bond every edge to the frame with DOWSIL™ 995 structural silicone.

  • DOWSIL™ 995 structural silicone
  • White, black & gray
  • Every edge, every pane

01 · The difference

Film alone, or film that's anchored.

Both panes carry the same film. Only one has it bonded to the frame.

Film alone Film applied without anchoring Cross-section of a glass pane in a frame. The film stops short of the frame, leaving the pane free to pop out under impact.

Unanchored

The film's edge is free. Under a hard impact the pane can fold out of its frame as a single sheet, and the opening is there for the taking.

The Talos method Film anchored to the frame with structural silicone Cross-section of a glass pane in a frame. The film runs to the frame and is bonded to it with a bead of structural silicone, keeping the pane retained.

Anchored with structural silicone

The film is bonded edge-to-frame with a bead of DOWSIL™ 995 structural silicone, so the pane stays retained even after the glass cracks.

  • Holds the pane, not just the shards

    Film keeps broken glass together. Anchoring ties that glass to the frame, which is what turns a delay into real resistance.

  • Professional-grade silicone

    Every edge is wet-glazed with DOWSIL™ 995, applied carefully and left to cure properly.

  • Assessed on every frame

    Frames and glazing differ. We check yours and recommend the right film thickness — 8 mil or 14 mil — and anchoring.

02 · How we anchor

Four careful steps, every pane.

Step 01

Prepare

The glass and the frame edge are cleaned and prepared so the silicone bonds properly.

Step 02

Apply the film

The film is applied edge to edge, free of bubbles, gaps and debris.

Step 03

Bond to the frame

A continuous bead of DOWSIL™ 995 bonds the film's edge to the frame.

Step 04

Cure & inspect

The silicone is left to cure properly, then every edge is inspected before we finish.

03 · Blends with your frames

White, black or gray.

DOWSIL™ 995 comes in white, black and gray, so we can match or blend the anchoring with your frames as cleanly as possible.

White Gray Black
White structural silicone anchoring security film to a white window frame
WhiteFor white and light-painted frames.
Black structural silicone being applied to anchor security film to a black window frame
BlackFor black and dark bronze frames.
Gray structural silicone anchoring security film to an aluminium storefront frame
GrayFor aluminium and commercial storefront frames.

04 · Before you hire anyone

Five questions to ask any installer.

Security film is only as good as its installation. These questions will tell you quickly how it will be done.

  1. How is the film anchored to the frame?Ask for the method and the product. "It's just applied to the glass" is not anchoring.
  2. Which sealant do you use?Anchoring calls for structural silicone such as DOWSIL™ 995, not a general-purpose caulk.
  3. Is the bond continuous around the whole pane?Gaps leave the pane free to pop out at the weak point.
  4. Can it be colour matched to my frames?Ours comes in white, black and gray.
  5. Is anchoring included in the quote, in writing?Make sure it's a line in the proposal, not an optional extra.

Questions

Anchoring, answered.

Does every window need to be anchored?

We anchor every security film installation. We assess each frame and glazing on site and recommend the right approach for your glass.

Will the silicone be visible?

It's a neat bead at the edge of the pane. We choose white, black or gray to match or blend with your frames as cleanly as possible.

Does anchoring work with tinted security film?

Yes. Our 8 mil silver and Stainless Steel films are anchored in the same way as our clear 8 mil and 14 mil films.

Is anchoring covered by the quote?

Yes. Anchoring is specified in your written proposal for each installation.

Begin

Let's protect what you've built.

Request a private consultation. We'll assess your glass and surfaces on site and give you a clear written proposal.

Free Consultation